Product Description

The LD series of log splitter consists of the TW-1 and the TW-2. These machines are built from scratch right here in the United States of America alongside all of our machines. The quality is evident not just in the craftsmanship that goes into our machines but also the thick gauge I-beam and alloy steel wedges. Whether you are buying for personal use or for commercial use these splitters are designed to be handed down through the generations.


Base ModelTW1
Engine Power (HP)4.9
Pump Flow (GPM)11
Splitting Force (Ton)19
Average Output Cord/Hr.75
Cycle Time (Sec)13
Stroke (in.)24"
Cylinder Bore (in.)4"

Standard Features

I-Beam Frame Construction
  • I-Beam Frame Construction
  • Boxed Ends for torsional rigidity
Innovative Step Wedge
  • 12” tall
  • 1” thick material; machined
  • “Step” on the bottom allows for the wood to cracked prior to full engagement
  • Capable of accepting our 4-way wedge with no tools; simply slide over
Honda GX-160

Optional Features

Optional 4-way wedge
  • Slides over step wedge can produce 4” material or be flipped over to produce 6” materials
  • Great to reduce the number of cylces required to split a load
  • AR400 Construction, Machined Edges. Read about AR400 here
Optional Table Grate
  • Slides into the end of the I-Beam for ease of use
  • Provides a catch pan for oversized pieces needing to be re-split
  • Also clears out debris if one is splitting into a buck or a conveyor
Manual Log Lift
  • Also clears out debris if one is splitting Capable of lifting up to 250 lbs this log lift allows the operator to lift large pieces of wood into the splitting chamber with less effort into a buck or a conveyor
  • Operates via the principle of leverage; easy to install; will last a lifetime
Scroll to Top